Showing posts with label limit. Show all posts
Showing posts with label limit. Show all posts

Wednesday, March 21, 2012

Identity Specification limit

what happens when a column marked as Identity Specification reaches the limit? for example, I have some code tables using tinyints as keys, the actual number of entries will be 20 or so but there is some volatility, so eventually the 255 limit will be reached, what happens then?

the same thing applies to ints or bigints used as keys, eventually the database must run out of numbers

information will be appreciated

David Wilson.

Hi,

When the maximum has been reached, an error will be generated. Here is an example:

--CREATE TABLE IDENTITYTEST
--(
-- ID TINYINT IDENTITY(1, 1),
-- TEXTVALUE VARCHAR(50)
--)

DECLARE @.COUNTER INT
SET @.COUNTER = 0

WHILE @.COUNTER < 260
BEGIN
INSERT INTO IDENTITYTEST(TEXTVALUE) VALUES ('VALUE ' + CAST(@.COUNTER AS VARCHAR(3)))
SET @.COUNTER = @.COUNTER + 1
END

/*
RESULT:
Msg 8115, Level 16, State 1, Line 12
Arithmetic overflow error converting IDENTITY to data type tinyint.
Arithmetic overflow occurred.
*/

Reference: http://msdn2.microsoft.com/en-us/library/ms186775.aspx

Greetz,

Geert

Geert Verhoeven
Consultant @. Ausy Belgium

My Personal Blog

|||

right, I did about the same thing (not quite as elegant :-)) - with the same result

the question is - How do you fix it? and how do you code something into a daily checkup routine or the like to find it and fix it before it happens?

Monday, March 12, 2012

IDENTITY limit

I defined a primary field using integer 4 bytes as IDENTITY.
What will be the limit of this number?
I am not sure the number is big enough in 10 years of time after my
application have been running."Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
>I defined a primary field using integer 4 bytes as IDENTITY.
> What will be the limit of this number?
> I am not sure the number is big enough in 10 years of time after my
> application have been running.
>
2^31-1 (2,147,483,647)
Keep in mind that all numbers are used, even if not allocated.
So if someone begins a transaction, inserts 1000 rows and rolls it back,
then 1000 IDENTITY values are "used" up.
Greg Moore
SQL Server DBA Consulting
Email: sql (at) greenms.com http://www.greenms.com|||2 billion. If that's not enough, you could start the seed at -2 billion and
double the capacity that way. If that's still not enough, you could use
BIGINT (and start at a negative number here, too), and if your app is going
to find a way to exceed that limit, then you should probably consider not
using an integer at all.
--
Aaron Bertrand
SQL Server MVP
http://www.sqlblog.com/
http://www.aspfaq.com/5006
"Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
>I defined a primary field using integer 4 bytes as IDENTITY.
> What will be the limit of this number?
> I am not sure the number is big enough in 10 years of time after my
> application have been running.
>|||Hello,
To add to Greg, the limitation wil be based on the usage. Incase if you feel
the INT is not big enough then go ahead and use the BIGINT data type
which will allow 2^63-1 (9,223,372,036,854,775,807) and the storage will be
8 bytes.
Thanks
Hari
"Greg D. Moore (Strider)" <mooregr_deleteth1s@.greenms.com> wrote in message
news:ufoLBFdZHHA.2316@.TK2MSFTNGP04.phx.gbl...
> "Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
> news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
>>I defined a primary field using integer 4 bytes as IDENTITY.
>> What will be the limit of this number?
>> I am not sure the number is big enough in 10 years of time after my
>> application have been running.
> 2^31-1 (2,147,483,647)
> Keep in mind that all numbers are used, even if not allocated.
> So if someone begins a transaction, inserts 1000 rows and rolls it back,
> then 1000 IDENTITY values are "used" up.
>
> --
> Greg Moore
> SQL Server DBA Consulting
> Email: sql (at) greenms.com http://www.greenms.com
>

IDENTITY limit

"Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
>I defined a primary field using integer 4 bytes as IDENTITY.
> What will be the limit of this number?
> I am not sure the number is big enough in 10 years of time after my
> application have been running.
>
2^31-1 (2,147,483,647)
Keep in mind that all numbers are used, even if not allocated.
So if someone begins a transaction, inserts 1000 rows and rolls it back,
then 1000 IDENTITY values are "used" up.
Greg Moore
SQL Server DBA Consulting
Email: sql (at) greenms.com http://www.greenms.com
Hello,
To add to Greg, the limitation wil be based on the usage. Incase if you feel
the INT is not big enough then go ahead and use the BIGINT data type
which will allow 2^63-1 (9,223,372,036,854,775,807) and the storage will be
8 bytes.
Thanks
Hari
"Greg D. Moore (Strider)" <mooregr_deleteth1s@.greenms.com> wrote in message
news:ufoLBFdZHHA.2316@.TK2MSFTNGP04.phx.gbl...
> "Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
> news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
> 2^31-1 (2,147,483,647)
> Keep in mind that all numbers are used, even if not allocated.
> So if someone begins a transaction, inserts 1000 rows and rolls it back,
> then 1000 IDENTITY values are "used" up.
>
> --
> Greg Moore
> SQL Server DBA Consulting
> Email: sql (at) greenms.com http://www.greenms.com
>

IDENTITY limit

I defined a primary field using integer 4 bytes as IDENTITY.
What will be the limit of this number?
I am not sure the number is big enough in 10 years of time after my
application have been running."Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
>I defined a primary field using integer 4 bytes as IDENTITY.
> What will be the limit of this number?
> I am not sure the number is big enough in 10 years of time after my
> application have been running.
>
2^31-1 (2,147,483,647)
Keep in mind that all numbers are used, even if not allocated.
So if someone begins a transaction, inserts 1000 rows and rolls it back,
then 1000 IDENTITY values are "used" up.
Greg Moore
SQL Server DBA Consulting
Email: sql (at) greenms.com http://www.greenms.com|||2 billion. If that's not enough, you could start the seed at -2 billion and
double the capacity that way. If that's still not enough, you could use
BIGINT (and start at a negative number here, too), and if your app is going
to find a way to exceed that limit, then you should probably consider not
using an integer at all.
Aaron Bertrand
SQL Server MVP
http://www.sqlblog.com/
http://www.aspfaq.com/5006
"Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
>I defined a primary field using integer 4 bytes as IDENTITY.
> What will be the limit of this number?
> I am not sure the number is big enough in 10 years of time after my
> application have been running.
>|||Hello,
To add to Greg, the limitation wil be based on the usage. Incase if you feel
the INT is not big enough then go ahead and use the BIGINT data type
which will allow 2^63-1 (9,223,372,036,854,775,807) and the storage will be
8 bytes.
Thanks
Hari
"Greg D. Moore (Strider)" <mooregr_deleteth1s@.greenms.com> wrote in message
news:ufoLBFdZHHA.2316@.TK2MSFTNGP04.phx.gbl...
> "Alan T" <alanpltseNOSPAM@.yahoo.com.au> wrote in message
> news:%23Q6$b5cZHHA.588@.TK2MSFTNGP06.phx.gbl...
> 2^31-1 (2,147,483,647)
> Keep in mind that all numbers are used, even if not allocated.
> So if someone begins a transaction, inserts 1000 rows and rolls it back,
> then 1000 IDENTITY values are "used" up.
>
> --
> Greg Moore
> SQL Server DBA Consulting
> Email: sql (at) greenms.com http://www.greenms.com
>

Friday, March 9, 2012

Identity field max size

What is the highest value that an identity field in a table can reach? is
there a limit to the size of the interger? or is it something like a 64bit
integer field used... If it's just a standard integer field, limiting it to
32,000 numbers it could use would be bad for my app..anything like this to
worry about when using an identity column for a primary key? thanks!The max value is dependent on the datatype you select (the span of values
for all datatypes are documented in Books Online, TSQL reference,
Datatypes).
--
Tibor Karaszi, SQL Server MVP
Archive at:
http://groups.google.com/groups?oi=djq&as_ugroup=microsoft.public.sqlserver
"Brian Henry" <Fakeaddress@.reschini.com> wrote in message
news:%236EBytP7DHA.1504@.TK2MSFTNGP12.phx.gbl...
> What is the highest value that an identity field in a table can reach? is
> there a limit to the size of the interger? or is it something like a 64bit
> integer field used... If it's just a standard integer field, limiting it
to
> 32,000 numbers it could use would be bad for my app..anything like this to
> worry about when using an identity column for a primary key? thanks!
>|||In article <elqJ82P7DHA.3804@.tk2msftngp13.phx.gbl>,
tibor_please.no.email_karaszi@.hotmail.nomail.com said...
> The max value is dependent on the datatype you select (the span of values
> for all datatypes are documented in Books Online, TSQL reference,
> Datatypes).
And if you have it as an int you can always roll it over to -2.1 billion
when you hit the max as long as your app doesn't use the identity for <>
operations. You can also switch it to bigint at that point and never
worry about filling it up, but that DDL operation would probably take a
while to update the table.

Identity field max size

What is the highest value that an identity field in a table can reach? is
there a limit to the size of the interger? or is it something like a 64bit
integer field used... If it's just a standard integer field, limiting it to
32,000 numbers it could use would be bad for my app..anything like this to
worry about when using an identity column for a primary key? thanks!The max value is dependent on the datatype you select (the span of values
for all datatypes are documented in Books Online, TSQL reference,
Datatypes).
Tibor Karaszi, SQL Server MVP
Archive at:
http://groups.google.com/groups?oi=...ublic.sqlserver
"Brian Henry" <Fakeaddress@.reschini.com> wrote in message
news:%236EBytP7DHA.1504@.TK2MSFTNGP12.phx.gbl...
> What is the highest value that an identity field in a table can reach? is
> there a limit to the size of the interger? or is it something like a 64bit
> integer field used... If it's just a standard integer field, limiting it
to
> 32,000 numbers it could use would be bad for my app..anything like this to
> worry about when using an identity column for a primary key? thanks!
>|||In article <elqJ82P7DHA.3804@.tk2msftngp13.phx.gbl>,
tibor_please.no.email_karaszi@.hotmail.nomail.com said...
> The max value is dependent on the datatype you select (the span of values
> for all datatypes are documented in Books Online, TSQL reference,
> Datatypes).
And if you have it as an int you can always roll it over to -2.1 billion
when you hit the max as long as your app doesn't use the identity for <>
operations. You can also switch it to bigint at that point and never
worry about filling it up, but that DDL operation would probably take a
while to update the table.