If numeric query

I have a table with a memo field that sometimes contains an account
number at the same location. I need to find a record related to that
account in another table. I can write and run a query for a record
which works fine if the account number exists, but (obviously) get an
error if it does not. I wrote the following query which I don't
understand why it will not work.
IF EXISTS (SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
(tblRegister.fldMemo,6,9)) = 1)
BEGIN
SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
fldStatus, fldLogDate, fldNote
FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
END
ELSE
BEGIN
SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
fldStatus, fldLogDate
FROM tblRegister
END
Any help on this would be greatly appreciated.
Thanks
CharlesA couple of comments.
First, isnumeric isn't foolproof. You may wish to review this source:
isnumeric -What is wrong?
http://www.aspfaq.com/show.asp?id=2390
Second, it appears that you are attempting to compare a string to a number,
e.g.,
SUBSTRING(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
(I'm assuming that tblNotes.fldMemberNo is a numeric datatype.)
You need to cast the first part as a numeric value in order make the compari
son. And this will not use indexing, so expect performance to be poor.
If you were to add another column to the Register table, set its value to be
the substring of the Memo field (or better yet, have the application provid
e the number), and then index that column, performance would be rather sprig
htly.
--
Arnie Rowland, Ph.D.
Westwood Consulting, Inc
Most good judgment comes from experience.
Most experience comes from bad judgment.
- Anonymous
You can't help someone get up a hill without getting a little closer to the
top yourself.
- H. Norman Schwarzkopf
<cbanks@.bjtsupport.com> wrote in message news:1162249400.557355.12560@.k70g2000cwa.googlegrou
ps.com...
>I have a table with a memo field that sometimes contains an account
> number at the same location. I need to find a record related to that
> account in another table. I can write and run a query for a record
> which works fine if the account number exists, but (obviously) get an
> error if it does not. I wrote the following query which I don't
> understand why it will not work.
>
> IF EXISTS (SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
> (tblRegister.fldMemo,6,9)) = 1)
>
> BEGIN
> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
> fldStatus, fldLogDate, fldNote
> FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
> (tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
> END
>
> ELSE
>
> BEGIN
> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
> fldStatus, fldLogDate
> FROM tblRegister
> END
>
> Any help on this would be greatly appreciated.
> Thanks
> Charles
>|||Arnie,
Thanks for the reply. My main issue is when I try to run this as an IF
statement I get an error "Incorrect syntax near the keyword 'BEGIN'."
I actually tried it without the 'Exists' after IF. If I run
SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
fldStatus, fldLogDate, fldNote
FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo with a where clause to
locate a record with a valid member number, it works fine. My issue is
running this when I don't have a valid member ID, which is what I am
trying to accomplish with the if statement.
It would have been better to include the member number in my register
table, but this was not in the original scope and I really don't want
to modify my table structure.
Charles
Arnie Rowland wrote:
> A couple of comments.
> First, isnumeric isn't foolproof. You may wish to review this source:
> isnumeric -What is wrong?
> http://www.aspfaq.com/show.asp?id=2390
>
> Second, it appears that you are attempting to compare a string to a number
, e.g.,
> SUBSTRING(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
> (I'm assuming that tblNotes.fldMemberNo is a numeric datatype.)
>
> You need to cast the first part as a numeric value in order make the compa
rison. And this will not use indexing, so expect performance to be poor.
> If you were to add another column to the Register table, set its value to
be the substring of the Memo field (or better yet, have the application prov
ide the number), and then index that column, performance would be rather spr
ightly.
> --
> Arnie Rowland, Ph.D.
> Westwood Consulting, Inc
> Most good judgment comes from experience.
> Most experience comes from bad judgment.
> - Anonymous
> You can't help someone get up a hill without getting a little closer to th
e top yourself.
> - H. Norman Schwarzkopf
>
> <cbanks@.bjtsupport.com> wrote in message news:1162249400.557355.12560@.k70g
2000cwa.googlegroups.com...
> --=_NextPart_000_048F_01C6FC3D.3D5AC000
> Content-Type: text/html; charset=iso-8859-1
> Content-Transfer-Encoding: quoted-printable
> X-Google-AttachSize: 5062
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> <HTML><HEAD>
> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
> <META content="MSHTML 6.00.5296.0" name=GENERATOR>
> <STYLE></STYLE>
> </HEAD>
> <BODY>
> <DIV><FONT face=Arial size=2>A couple of comments.</FONT></DIV>
> <DIV><FONT face=Arial size=2></FONT> </DIV>
> <DIV><FONT face=Arial size=2>First, isnumeric isn't foolproof. You may wis
h to
> review this source:</FONT></DIV>
> <DIV><FONT face=Arial size=2></FONT> </DIV>
> <DIV>
> <P class=MsoNormal
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"><SPAN
> style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial; mso-no-proof: yes
">isnumeric
> -What is wrong?<BR></SPAN><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s"><A
> href="http://links.10026.com/?link=http://www.aspfaq.com/show.asp?id=2390">http://www.aspfaq.com/show.asp?id=
2390</A>
> </SPAN></P>
> <P class=MsoNormal
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s"><FONT
> face=Arial size=2></FONT></SPAN> </P>
> <P class=MsoNormal
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s">Second,
> it appears that you are attempting to compare a string to a number, e.g.,
> </SPAN></P>
> <P class=MsoNormal
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s"><FONT
> face="Courier New">SUBSTRING(tblRegister.fldMemo,6,9) =
> tblNotes.fldMemberNo</FONT></SPAN></P>
> <P class=MsoNormal
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s">(I'm assuming
> that tblNotes.fldMemberNo is a numeric datatype.)<BR></P></SPAN>
> <P class=MsoNormal
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s">You
> need to cast the first part as a numeric value in order make the compariso
n.
> </SPAN><SPAN
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: ye
s">And
> this will not use indexing, so expect performance to be poor.</P></SPAN></
DIV>
> <DIV><FONT face=Arial size=2>If you were to add another column to the Regi
ster
> table, set its value to be the substring of the Memo field (or better yet,
have
> the application provide the number), and then index that column, performan
ce
> would be rather sprightly.</FONT><BR><FONT face=Arial size=2>-- <BR>Arnie
> Rowland, Ph.D.<BR>Westwood Consulting, Inc</FONT></DIV>
> <DIV><FONT face=Arial size=2></FONT> </DIV>
> <DIV><FONT face=Arial size=2>Most good judgment comes from experience. <BR
>Most
> experience comes from bad judgment. <BR>- Anonymous</FONT></DIV>
> <DIV><FONT face=Arial size=2></FONT> </DIV>
> <DIV><FONT face=Arial size=2>You can't help someone get up a hill without
> getting a little closer to the top yourself.<BR>- H. Norman
> Schwarzkopf</FONT></DIV>
> <DIV><FONT face=Arial size=2></FONT> </DIV>
> <DIV><FONT face=Arial size=2></FONT> </DIV>
> <DIV><FONT face=Arial size=2><</FONT><A
> href="http://links.10026.com/?link=mailto:cbanks@.bjtsupport.com"><FONT face=Arial
> size=2>cbanks@.bjtsupport.com</FONT></A><FONT face=Arial size=2>> wrote
in
> message </FONT><A
> href="http://links.10026.com/?link=news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com"><FONT
> face=Arial
> size=2>news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com</FONT></A
><FONT
> face=Arial size=2>...</FONT></DIV><FONT face=Arial size=2>>I have a tab
le
> with a memo field that sometimes contains an account<BR>> number at the
same
> location. I need to find a record related to that<BR>> accoun
t in
> another table. I can write and run a query for a record<BR>>
which
> works fine if the account number exists, but (obviously) get an<BR>> er
ror if
> it does not. I wrote the following query which I don't<BR>> u
nderstand
> why it will not work.<BR>> <BR>> IF EXISTS (SELECT fldMemo FROM
> tblRegister WHERE ISNUMERIC(SUBSTRING<BR>> (tblRegister.fldMemo,6,9)) =
> 1)<BR>> <BR>> BEGIN<BR>> SELECT fldChkNo, fldDate, fldName, fldMe
mo,
> fldAmt, fldTransmitted,<BR>> fldStatus, fldLogDate, fldNote<BR>> FRO
M
> tblRegister INNER JOIN tblNotes ON SUBSTRING<BR>> (tblRegister.fldMemo,
6,9) =
> tblNotes.fldMemberNo<BR>> END<BR>> <BR>> ELSE<BR>> <BR>>
> BEGIN<BR>> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt,
> fldTransmitted,<BR>> fldStatus, fldLogDate<BR>> FROM tblRegister<BR>
> END<BR>> <BR>> Any help on this would be greatly appreciated.<BR>>
;
> Thanks<BR>> Charles<BR>></FONT></BODY></HTML>
> --=_NextPart_000_048F_01C6FC3D.3D5AC000--|||Charles,
exists is really for subqueries. However you could use:
IF (SELECT count(*) FROM tblRegister WHERE ISNUMERIC(SUBSTRING
(tblRegister.fldMemo,6,9)) = 1) > 0
....
or
SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
(tblRegister.fldMemo,6,9)) = 1
if @.@.rowcount > 0
....
Cheers,
Paul Ibison SQL Server MVP, www.replicationanswers.com .|||> exists is really for subqueries. However you could use:
> IF (SELECT count(*) FROM tblRegister WHERE ISNUMERIC(SUBSTRING
> (tblRegister.fldMemo,6,9)) = 1) > 0
I'm not sure why this is better than
IF EXISTS (SELECT 1 FROM tblRegister ...)
BEGIN
END
? The exists is potentially faster, and certainly not any slower, than a
select count.
The syntax problem he had was likely just a missing parenthesis...
A|||Thanks Aaron - my goof .
For some obscure reason I had assumed that it was returning a single row
(long night and needed more coffee!), but as I look more closely at what I
wrote I see issues with both solutions - Charles please disregard my earlier
post.
Regards,
Paul Ibison|||Actually, not a missing parens, but including an equality [ = 1 ) > 0 ]
which made the statement invalid. The statement 'should' work as:
IF EXISTS
( SELECT fldMemo
FROM tblRegister
WHERE isnumeric( substring( tblRegister.fldMemo, 6, 9 ))
)
BEGIN
--
Arnie Rowland, Ph.D.
Westwood Consulting, Inc
Most good judgment comes from experience.
Most experience comes from bad judgment.
- Anonymous
You can't help someone get up a hill without getting a little closer to the
top yourself.
- H. Norman Schwarzkopf
"Aaron Bertrand [SQL Server MVP]" <ten.xoc@.dnartreb.noraa> wrote in message news:uFkIfWP
$GHA.4708@.TK2MSFTNGP05.phx.gbl...
>
> I'm not sure why this is better than
>
> IF EXISTS (SELECT 1 FROM tblRegister ...)
> BEGIN
> END
>
> ? The exists is potentially faster, and certainly not any slower, than a
> select count.
>
> The syntax problem he had was likely just a missing parenthesis...
>
> A
>
>|||> Actually, not a missing parens, but including an equality [ = 1 ) > 0 ]">
> which made the statement invalid.
Where? I didn't see his code, I just saw fragments of it.
A

If numeric query

I have a table with a memo field that sometimes contains an account
number at the same location. I need to find a record related to that
account in another table. I can write and run a query for a record
which works fine if the account number exists, but (obviously) get an
error if it does not. I wrote the following query which I don't
understand why it will not work.
IF EXISTS (SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
(tblRegister.fldMemo,6,9)) = 1)
BEGIN
SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
fldStatus, fldLogDate, fldNote
FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
END
ELSE
BEGIN
SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
fldStatus, fldLogDate
FROM tblRegister
END
Any help on this would be greatly appreciated.
Thanks
CharlesThis is a multi-part message in MIME format.
--=_NextPart_000_048F_01C6FC3D.3D5AC000
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
A couple of comments.
First, isnumeric isn't foolproof. You may wish to review this source:
isnumeric -What is wrong?
http://www.aspfaq.com/show.asp?id=3D2390=20
Second, it appears that you are attempting to compare a string to a =number, e.g.,
SUBSTRING(tblRegister.fldMemo,6,9) =3D tblNotes.fldMemberNo
(I'm assuming that tblNotes.fldMemberNo is a numeric datatype.)
You need to cast the first part as a numeric value in order make the =comparison. And this will not use indexing, so expect performance to be =poor.
If you were to add another column to the Register table, set its value =to be the substring of the Memo field (or better yet, have the =application provide the number), and then index that column, performance =would be rather sprightly.
-- Arnie Rowland, Ph.D.
Westwood Consulting, Inc
Most good judgment comes from experience. Most experience comes from bad judgment. - Anonymous
You can't help someone get up a hill without getting a little closer to =the top yourself.
- H. Norman Schwarzkopf
<cbanks@.bjtsupport.com> wrote in message =news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com...
>I have a table with a memo field that sometimes contains an account
> number at the same location. I need to find a record related to that
> account in another table. I can write and run a query for a record
> which works fine if the account number exists, but (obviously) get an
> error if it does not. I wrote the following query which I don't
> understand why it will not work.
> > IF EXISTS (SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
> (tblRegister.fldMemo,6,9)) =3D 1)
> > BEGIN
> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
> fldStatus, fldLogDate, fldNote
> FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
> (tblRegister.fldMemo,6,9) =3D tblNotes.fldMemberNo
> END
> > ELSE
> > BEGIN
> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
> fldStatus, fldLogDate
> FROM tblRegister
> END
> > Any help on this would be greatly appreciated.
> Thanks
> Charles
>
--=_NextPart_000_048F_01C6FC3D.3D5AC000
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

---

A couple of comments.
First, isnumeric isn't foolproof. You =may wish to review this source:
isnumeric -What is wrong?http://www.aspfaq.com/show.asp?id=3D2390">http://www.aspfaq.com/s=how.asp?id=3D2390
Second, it appears that you are attempting to compare a string to a number, =e.g., SUBSTRING(tblRegister.fldMemo,6,9) =3D tblNotes.fldMemberNo
(I'm assuming that tblNotes.fldMemberNo is a numeric datatype.)
You need to cast the first part as a numeric value in order make the =comparison. And this will not use indexing, so expect performance to be =poor.
If you were to add another column to =the Register table, set its value to be the substring of the Memo field (or better =yet, have the application provide the number), and then index that column, =performance would be rather sprightly.-- =Arnie Rowland, Ph.D.Westwood Consulting, Inc
Most good judgment comes from =experience. Most experience comes from bad judgment. - Anonymous
You can't help someone get up a hill =without getting a little closer to the top yourself.- H. Norman Schwarzkopf
wrote in message news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com=...>I =have a table with a memo field that sometimes contains an account> number at =the same location. I need to find a record related to that> account =in another table. I can write and run a query for a record> =which works fine if the account number exists, but (obviously) get an> =error if it does not. I wrote the following query which I don't> =understand why it will not work.> > IF EXISTS (SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING> (tblRegister.fldMemo,6,9)) ==3D 1)> > BEGIN> SELECT fldChkNo, fldDate, fldName, =fldMemo, fldAmt, fldTransmitted,> fldStatus, fldLogDate, fldNote> =FROM tblRegister INNER JOIN tblNotes ON SUBSTRING> =(tblRegister.fldMemo,6,9) =3D tblNotes.fldMemberNo> END> > ELSE> > BEGIN> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,> fldStatus, fldLogDate> FROM =tblRegister> END> > Any help on this would be greatly =appreciated.> Thanks> Charles>

---

--=_NextPart_000_048F_01C6FC3D.3D5AC000--|||Arnie,
Thanks for the reply. My main issue is when I try to run this as an IF
statement I get an error "Incorrect syntax near the keyword 'BEGIN'."
I actually tried it without the 'Exists' after IF. If I run
SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
fldStatus, fldLogDate, fldNote
FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo with a where clause to
locate a record with a valid member number, it works fine. My issue is
running this when I don't have a valid member ID, which is what I am
trying to accomplish with the if statement.
It would have been better to include the member number in my register
table, but this was not in the original scope and I really don't want
to modify my table structure.
Charles
Arnie Rowland wrote:
> A couple of comments.
> First, isnumeric isn't foolproof. You may wish to review this source:
> isnumeric -What is wrong?
> http://www.aspfaq.com/show.asp?id=2390
>
> Second, it appears that you are attempting to compare a string to a number, e.g.,
> SUBSTRING(tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
> (I'm assuming that tblNotes.fldMemberNo is a numeric datatype.)
>
> You need to cast the first part as a numeric value in order make the comparison. And this will not use indexing, so expect performance to be poor.
> If you were to add another column to the Register table, set its value to be the substring of the Memo field (or better yet, have the application provide the number), and then index that column, performance would be rather sprightly.
> --
> Arnie Rowland, Ph.D.
> Westwood Consulting, Inc
> Most good judgment comes from experience.
> Most experience comes from bad judgment.
> - Anonymous
> You can't help someone get up a hill without getting a little closer to the top yourself.
> - H. Norman Schwarzkopf
>
> <cbanks@.bjtsupport.com> wrote in message news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com...
> >I have a table with a memo field that sometimes contains an account
> > number at the same location. I need to find a record related to that
> > account in another table. I can write and run a query for a record
> > which works fine if the account number exists, but (obviously) get an
> > error if it does not. I wrote the following query which I don't
> > understand why it will not work.
> >
> > IF EXISTS (SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
> > (tblRegister.fldMemo,6,9)) = 1)
> >
> > BEGIN
> > SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
> > fldStatus, fldLogDate, fldNote
> > FROM tblRegister INNER JOIN tblNotes ON SUBSTRING
> > (tblRegister.fldMemo,6,9) = tblNotes.fldMemberNo
> > END
> >
> > ELSE
> >
> > BEGIN
> > SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt, fldTransmitted,
> > fldStatus, fldLogDate
> > FROM tblRegister
> > END
> >
> > Any help on this would be greatly appreciated.
> > Thanks
> > Charles
> >
> --=_NextPart_000_048F_01C6FC3D.3D5AC000
> Content-Type: text/html; charset=iso-8859-1
> Content-Transfer-Encoding: quoted-printable
> X-Google-AttachSize: 5062
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> &

---

>
>
>
>
>
> A couple of comments.
>
> First, isnumeric isn't foolproof. You may wish to
> review this source:
>
>
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"> style="FONT-SIZE: 10pt; COLOR: navy; FONT-FAMILY: Arial; mso-no-proof: yes">isnumeric
> -What is wrong? style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes"> href="http://links.10026.com/?link=http://www.aspfaq.com/show.asp?id=2390">http://www.aspfaq.com/show.asp?id=2390">http://www.aspfaq.com/show.asp?id=2390
>
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes"> face=Arial size=2>
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes">Second,
> it appears that you are attempting to compare a string to a number, e.g.,
>
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes"> face="Courier New">SUBSTRING(tblRegister.fldMemo,6,9) => tblNotes.fldMemberNo
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes">(I'm assuming
> that tblNotes.fldMemberNo is a numeric datatype.)
> style="MARGIN: 0in 0in 6pt; mso-layout-grid-align: none"> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes">You
> need to cast the first part as a numeric value in order make the comparison.
> style="FONT-SIZE: 10pt; COLOR: black; FONT-FAMILY: Arial; mso-no-proof: yes">And
> this will not use indexing, so expect performance to be poor.
> If you were to add another column to the Register
> table, set its value to be the substring of the Memo field (or better yet, have
> the application provide the number), and then index that column, performance
> would be rather sprightly.-- Arnie
> Rowland, Ph.D.Westwood Consulting, Inc
>
> Most good judgment comes from experience. Most
> experience comes from bad judgment. - Anonymous
>
> You can't help someone get up a hill without
> getting a little closer to the top yourself.- H. Norman
> Schwarzkopf
>
>
>< href="http://links.10026.com/?link=mailto:cbanks@.bjtsupport.com"> size=2>cbanks@.bjtsupport.com> wrote in
> message href="http://links.10026.com/?link=news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com"> face=Arial
> size=2>news:1162249400.557355.12560@.k70g2000cwa.googlegroups.com face=Arial size=2>...>I have a table
> with a memo field that sometimes contains an account> number at the same
> location. I need to find a record related to that> account in
> another table. I can write and run a query for a record> which
> works fine if the account number exists, but (obviously) get an> error if
> it does not. I wrote the following query which I don't> understand
> why it will not work.> > IF EXISTS (SELECT fldMemo FROM
> tblRegister WHERE ISNUMERIC(SUBSTRING> (tblRegister.fldMemo,6,9)) => 1)> > BEGIN> SELECT fldChkNo, fldDate, fldName, fldMemo,
> fldAmt, fldTransmitted,> fldStatus, fldLogDate, fldNote> FROM
> tblRegister INNER JOIN tblNotes ON SUBSTRING> (tblRegister.fldMemo,6,9) => tblNotes.fldMemberNo> END> > ELSE> >
> BEGIN> SELECT fldChkNo, fldDate, fldName, fldMemo, fldAmt,
> fldTransmitted,> fldStatus, fldLogDate> FROM tblRegister>
> END> > Any help on this would be greatly appreciated.>
> Thanks> Charles>

---

> --=_NextPart_000_048F_01C6FC3D.3D5AC000--|||Charles,
exists is really for subqueries. However you could use:
IF (SELECT count(*) FROM tblRegister WHERE ISNUMERIC(SUBSTRING
(tblRegister.fldMemo,6,9)) = 1) > 0
....
or
SELECT fldMemo FROM tblRegister WHERE ISNUMERIC(SUBSTRING
(tblRegister.fldMemo,6,9)) = 1
if @.@.rowcount > 0
....
Cheers,
Paul Ibison SQL Server MVP, www.replicationanswers.com .|||> exists is really for subqueries. However you could use:
> IF (SELECT count(*) FROM tblRegister WHERE ISNUMERIC(SUBSTRING
> (tblRegister.fldMemo,6,9)) = 1) > 0
I'm not sure why this is better than
IF EXISTS (SELECT 1 FROM tblRegister ...)
BEGIN
END
? The exists is potentially faster, and certainly not any slower, than a
select count.
The syntax problem he had was likely just a missing parenthesis...
A|||Thanks Aaron - my goof :(.
For some obscure reason I had assumed that it was returning a single row
(long night and needed more coffee!), but as I look more closely at what I
wrote I see issues with both solutions - Charles please disregard my earlier
post.
Regards,
Paul Ibison|||This is a multi-part message in MIME format.
--=_NextPart_000_057B_01C6FCC2.47296CF0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Actually, not a missing parens, but including an equality [ =3D 1 ) > 0 =] which made the statement invalid. The statement 'should' work as:
IF EXISTS ( SELECT fldMemo FROM tblRegister WHERE isnumeric( substring( tblRegister.fldMemo, 6, 9 ))
)
BEGIN
-- Arnie Rowland, Ph.D.
Westwood Consulting, Inc
Most good judgment comes from experience. Most experience comes from bad judgment. - Anonymous
You can't help someone get up a hill without getting a little closer to =the top yourself.
- H. Norman Schwarzkopf
"Aaron Bertrand [SQL Server MVP]" <ten.xoc@.dnartreb.noraa> wrote in =message news:uFkIfWP$GHA.4708@.TK2MSFTNGP05.phx.gbl...
>> exists is really for subqueries. However you could use:
>> IF (SELECT count(*) FROM tblRegister WHERE ISNUMERIC(SUBSTRING >> (tblRegister.fldMemo,6,9)) =3D 1) > 0
> > I'm not sure why this is better than
> > IF EXISTS (SELECT 1 FROM tblRegister ...)
> BEGIN
> END
> > ? The exists is potentially faster, and certainly not any slower, =than a > select count.
> > The syntax problem he had was likely just a missing parenthesis...
> > A > >
--=_NextPart_000_057B_01C6FCC2.47296CF0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

---

Actually, not a missing parens, but =including an equality [ =3D 1 ) > 0 ] which made the statement invalid. The =statement 'should' work as:
IF EXISTS
( SELECT =fldMemo =FROM tblRegister
=WHERE isnumeric( substring( tblRegister.fldMemo, 6, 9 ))
=)
=BEGIN-- Arnie =Rowland, Ph.D.Westwood Consulting, Inc
Most good judgment comes from =experience. Most experience comes from bad judgment. - Anonymous
You can't help someone get up a hill =without getting a little closer to the top yourself.- H. Norman Schwarzkopf
"Aaron Bertrand [SQL Server MVP]" = wrote in message news:uFkIfWP$GHA.4708@.TK2MSFTNGP05.phx.gbl...> exists is really for subqueries. However you could use:> IF (SELECT =count(*) FROM tblRegister WHERE ISNUMERIC(SUBSTRING > (tblRegister.fldMemo,6,9)) =3D 1) > 0> > I'm not sure =why this is better than> > IF EXISTS (SELECT 1 FROM tblRegister =...)> BEGIN> END> > ? The exists is potentially =faster, and certainly not any slower, than a > select count.> > =The syntax problem he had was likely just a missing parenthesis...> => A > >

---

--=_NextPart_000_057B_01C6FCC2.47296CF0--|||> Actually, not a missing parens, but including an equality [ = 1 ) > 0 ]
> which made the statement invalid.
Where? I didn't see his code, I just saw fragments of it.
A

If body contains two tables, report preview breaks are getting upset

When there are two tables in the body, if page break is added for first table, second table always go to a new page in report preview. But print layout preview is working fine.

Keep your two tables side by side.

IE7 and RS2005 navigation issues

When I run a report under Firefox, it works fine.
If the report contains a drill through, and I drill through and then try to
back up, the report will spin and never refresh unless I manually click
refresh.
Steps to repro:
1. Create two reports, one with a drill through and the second the target
of a drill through.
2. Publish the reports.
3. Using either URL access or the report manager GUI, browse to the parent
report in IE7. Not sure if it matters, but this is on Vista.
4. From the parent report, drill through to the child report.
5. Using any of the various ways to navigate backwards, backup to the
parent report. The report will spin and never resolve.
Is this a configuration issue on my end or is this an IE7 issue? I've tried
various browser options and I get this behavior no matter what. It works
fine in Firefox and Opera.
Thanks,
JustinHello Justin,
I would like to know whether you have add your server into the trust area
and enabled the javascript.
I tested on my Vista machine and I could drillthrough and backwards
correctly.
Please let me know if you still could not navigate the report.
Thanks!
Sincerely,
Wei Lu
Microsoft Online Community Support
==================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
==================================================This posting is provided "AS IS" with no warranties, and confers no rights.|||Wei,
Thank you for fielding this.
I've tried various IE7 security settings, including setting it to low and
protection mode to off.
I did a bit more research and here's what I see.
1. When you drill through to the subreport, it loads fine.
2. When you hit back and check the URL of the iframe for the
reportview.axd, the parameter information is gone.
It still has the report the target in the query string, but parameters have
been lost.
Note - I am running without default parameters.
Perhaps you could try and use a drill through that requires parameters and
let me know if you can reproduce it.
Thanks,
Justin
"Wei Lu [MSFT]" <weilu@.online.microsoft.com> wrote in message
news:nFvYtABfHHA.4368@.TK2MSFTNGHUB02.phx.gbl...
> Hello Justin,
> I would like to know whether you have add your server into the trust area
> and enabled the javascript.
> I tested on my Vista machine and I could drillthrough and backwards
> correctly.
> Please let me know if you still could not navigate the report.
> Thanks!
> Sincerely,
> Wei Lu
> Microsoft Online Community Support
> ==================================================> When responding to posts, please "Reply to Group" via your newsreader so
> that others may learn and benefit from your issue.
> ==================================================> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>|||Hello Justin,
I would like to know where did you view the report? Direct in IE to view
the reports on Report Server? Or are you using the Sharepoint Web Part to
view the report?
Also, what did you use to drillthough the report. Jump to Report or Jump to
URL?
I tested the child report with paremeter which still could drillthrough
correctly.
Sincerely,
Wei Lu
Microsoft Online Community Support
==================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
==================================================This posting is provided "AS IS" with no warranties, and confers no rights.|||Hi ,
How is everything going? Please feel free to let me know if you need any
assistance.
Sincerely,
Wei Lu
Microsoft Online Community Support
==================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
==================================================This posting is provided "AS IS" with no warranties, and confers no rights.|||On Apr 12, 5:10 am, w...@.online.microsoft.com (Wei Lu [MSFT]) wrote:
> Hello Justin,
> I would like to know where did you view the report? Direct in IE to view
> the reports on Report Server? Or are you using the Sharepoint Web Part to
> view the report?
> Also, what did you use to drillthough the report. Jump to Report or Jump to
> URL?
> I tested the child report with paremeter which still could drillthrough
> correctly.
> Sincerely,
> Wei Lu
> Microsoft Online Community Support
> ==================================================> When responding to posts, please "Reply to Group" via your newsreader so
> that others may learn and benefit from your issue.
> ==================================================> This posting is provided "AS IS" with no warranties, and confers no rights.
I am having the exact same issue with any drilldown reports. When I
try to go back to the parent report, it just spins and never
resolves. If I hit the refresh button, then it resolves. Has anyone
figured out what this issue is?
Thanks,
Scott|||I also have the same problem. I have a three layer report in which the drill
downs are just fine but the IE7 Back button leaves me spinning forever. The
project runs fine in the designer. At this stage of development, I am running
locally so there should not be any network problem.
Any assistance would be greatly appreciated.
Thanks
Dennis
"scott.hunley@.cox.net" wrote:
> On Apr 12, 5:10 am, w...@.online.microsoft.com (Wei Lu [MSFT]) wrote:
> > Hello Justin,
> >
> > I would like to know where did you view the report? Direct in IE to view
> > the reports on Report Server? Or are you using the Sharepoint Web Part to
> > view the report?
> >
> > Also, what did you use to drillthough the report. Jump to Report or Jump to
> > URL?
> >
> > I tested the child report with paremeter which still could drillthrough
> > correctly.
> >
> > Sincerely,
> >
> > Wei Lu
> > Microsoft Online Community Support
> >
> > ==================================================> >
> > When responding to posts, please "Reply to Group" via your newsreader so
> > that others may learn and benefit from your issue.
> >
> > ==================================================> > This posting is provided "AS IS" with no warranties, and confers no rights.
>
> I am having the exact same issue with any drilldown reports. When I
> try to go back to the parent report, it just spins and never
> resolves. If I hit the refresh button, then it resolves. Has anyone
> figured out what this issue is?
> Thanks,
> Scott
>

IDENTITY Problems Updating ZipCode Table

I am having problems updating my zip code table that contains zip, city, state, long, lat, ect..

I have the latest CSV file, I tried to use the import wizard in SQL Server 2000 Enterprise Manager.
I set the ID field as <ignore> and specified the appropriate columns for the rest of the data matching from CSV to already designed and working zip code table. Also I checked the box that said "Delete Rows in Destination Table" as well as "Enable Identity Insert" was checked

I ran the wizard, and now I have empty table and it will not insert any records because the error said that the identity column can not accept NULL.

What do I do? I am not updating the identify column so Is it telling me it can't insert NULL into ID?

Any suggestions...

Thanks,
LitoI set the ID field as <ignore>
...
as well as "Enable Identity Insert" was checked
...
error said that the identity column can not accept NULL.

You are inserting NULL into the ID field, because you have "<ignore>" selected for the ID column, and "Enable Identity Insert" checked. You need to uncheck "Enable Identity Insert" and this should work.|||For the 5th Time I repeated the process and this time i did not check "Enable Identity Insert" and it worked.

Sory to bother you, I was just getting frustrated with this stupid problem|||That's Ok... I think the reason that most of us hang out here is to give folks a hand (and occaisionally make the others say "Doh, why didn't I think of that!"). As long as life is good now, that is all that counts!

-PatP